Control Remoto de Copia para Puerta de Garaje, 433.92 MHz, Duplicador Súper Fuerte, Control de Acceso, Llave ABCD, Exportación de Comercio Exterior

Compra online al por mayor más de 1 millón de productos. Pedido mínimo: US$ 6,000

Iniciar sesión

Registrarse

Carrito

Catálogo

Seguridad, protección

Alarma

Accesorios de alarma

Control Remoto de Copia para Puerta de Garaje, 433.92 MHz, Duplicador Súper Fuerte, Control de Acceso, Llave ABCD, Exportación de Comercio Exterior

Atributos clave

Si la exportación transfronteriza está disponible exclusivamente

Sí

Número de pedido

DK501

Distancia de transmisión inalámbrica

100

Corriente nominal

0,8

Alcance DE LA APLICACIÓN

Industrial, hogar

Dimensiones

65*35,8*16

Detalles del producto

包装方法：6*9小PP袋/PCS, 50个装+钥匙扣=英文说明书，大量可按要求订做.

出口欧美中东国家（巴西俄罗斯中东越南非洲等等·····）

拷贝学习说明书

1、可以对拷的芯片：
2260（所有厂商）、2262（所有厂商）、PT2264、5326（所有厂商）、SC5262、HT600、HT680、HT6207、HT6010、HT6012、HT6014、SMC918系列、527（所有厂商）、1527（所有厂商）、2240（所有厂商）、HCS101、HCS200\HCS201(部分代码）、HCS300\HCS301(部分代码）、部分单片机..........

1.Chips could be copied

2260(all manufacturers);2262(All manufacturers);PT2264, 5326(All manufacturers);SC5262, HT600, HT680, HT6207, HT6010, HT6012, HT6014, SMC918series,527(All manufacturers);1527(All manufacturers);2240(All manufacturers);HCS101, HCS200\HCS201(part code),HCS300\HCS301(部分代码), part single chip microcomputer..........

2、清码方法：
同时按住开锁与关锁两键（有些外壳是上行与下行两键）LED指示灯进入快速闪烁状态，此时内存的数据全部清除，清完数据之后的遥控器，无论按哪个按键，LED指示灯都是不亮。
2.Code cleaning method:

At the same time, press and hold the two keys of unlock and lock (some cases have two keys of up and down) and the LED indicator light will enter the state of fast flashing. At this time, all the data in the memory will be cleared. After the data is cleared, the remote control will not light up no matter which key you press.

3、对拷方法：
一手持原配遥控器，另一手持对拷遥

控器，两只遥控器尽量靠近，分别按下所需对拷的按键，LED指示灯快速闪烁后快速闪烁，对拷成功，其他按键操作方法相同。有些遥控器发射功率较小，应原配遥控器与对拷遥控器背靠背操作，才好对拷。有些操作环境有干扰的，应避开干扰操作，如果对拷不太好使的，清码以后重新对拷。（特别重要：您手上的遥控器必须能正常工作且与我们的遥控器频率相同）
3. Copy method

One hand keeps the original remote controller, while another keeps the copy remote control, the two remote controls should be placed as closely as possible (the ideal situation is to put the two remote controls on the desktop side by side with zero distance), respectively press down the copy button, when the LED indicator light flashes quickly after three flashes, this copy is successful, other key operating methods are the same. Some remote control has a smaller transmitting power, so the original remote control should be placed back to the copy remote control to be operated. For the presence of noise, it should avoid interference to operate, If the copy is not successful, it should recopy after clearing code.（ Attention：Your original remote control must be able to work and the same as our remote control frequency）

微信图片_20201112172036