中文标题：适用于小米 Redmi Note 5A Prime / Remdi Y1 TFT材质 液晶触摸总成带框 (颜色：黑色)

英文标题：TFT LCD Screen for for Xiaomi Redmi Note 5A Prime / Remdi Y1 Digitizer Full Assembly with Frame(Black)

关于产品
1.用于适用于小米 Redmi Note 5A Prime / Remdi Y1 的更换液晶显示屏+触摸屏数字转换器组件带框
2.更换旧的，破损的，不能工作的，损坏的
3.让您的设备看起来比以前更好
4.完全适合和工作
5.每件商品在发货前都已经过检查并保持良好状态
6.强烈建议专业安装。 一旦屏幕安装，我们将不负责任
安装前注意事项
提示1：安装前测试
测试时，请勿移除任何保护膜或标签。请注意静电问题。
在尝试任何修理之前，请务必戴上ESD（静电放电）带。这将防止静电损坏手机内的电子元件。
确保您佩戴护目镜并小心不要用玻璃碎片割伤您的手指。
提示2：模拟测试
屏幕更换是非常脆弱的产品。我们强烈建议在安装前测试。请模拟测试，这意味着手机分开，（主板+ LCD或屏幕）连接音频线和新的更换，通电，测试完成。如果测试成功，请安装。如果无法显示，请在第一时间与我们联系。并且请不要强迫它被安装在手机中。一旦屏幕安装，我们将不负责任。
提示3：不要过度弯曲电缆
请确保LCD电缆不要过度弯曲。超过90度弯曲将导致黑色显示。

About the product
1. Replacement LCD screen + touch screen digitizer assembly (with frame) for for Xiaomi Redmi Note 5A Prime / Remdi Y1
2. Replace your broken or unusable item with a new one
3. Make your device look more refreshing than ever
4. Completely fit and work
5. Each item has been checked and in good condition before shipping
6. Professional installation is highly recommended. We will not be responsible once the screen is installed
Before Installation Notes
Tips 1: Test before installation
When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.
Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone.
Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.
Tips 2: Simulates testing
Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed.
Tips 3: Do not over-bend cable
Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.

装箱信息：
每箱个数:40pcs
毛重:6.20kg
整箱尺寸:47.00*31.00*32.00cm

单个重量和尺寸：
重量:150.00g
长:20.00cm
宽:10.00cm
高:3.00cm